ekey net finger scanner outlet-mounted

With its compact dimensions of 50x50 mm, the outlet-mounted finger scanner is the ideal solution for installation into electrical gang boxes, entrance panels and mailboxes. Compatible with the frames of leading switch manufacturers and available in white, anthracite and aluminum color, it fits perfectly into their existing product range.

The finger scanner is equipped with a line sensor, so instead of placing a finger on the surface, the finger has to be swiped over the sensor. This way, no fingerprints are left, which could else be used for misuse. In addition, the finger scanner is equipped with intelligent software: On each operation, the system continues learning. Changes in the user’s habit will be recorded automatically.

There are screw terminals on the reverse side of the finger scanner, through which the device is connected to the ekey net control panel. The communication between both components is encrypted.

ekey net control panel

For the operation of an ekey net system, a suitable ekey net control panel is required. Depending on the type of installation, it is available in different versions.

	With its compact dimensions, the DRM control panel is ideally suited for the installation on a DIN rail into an electrical cabinet (distribution board), or onto a wall. The ekey net CP DRM4 is equipped with 4 dry relay outputs and 4 digital inputs. To wire the control panel with the finger scanner, it contains screw terminals.
	The wall-mounted control panel can be fitted on a DIN rail onto a wall, or into the electrical cabinet (distribution board). The ekey net CP WM3 is equipped with 3 dry relay outputs. To wire the control panel with the finger scanner, it contains spring clips.
	The particularly compact control panel mini can be fitted on a DIN rail into an electrical cabinet (distribution board), or onto a wall. The ekey net CP mini1 is equipped with 1 dry relay output and 1 digital input. To wire the control panel with the finger scanner, it contains screw terminals.

The relay outputs are used to control electromechanical locks, door strikes, engines for garage doors, intrusion alarms, etc.

Examples

ekey net CP mini1: The lock is connected to the relay output. Swiping the right index finger will open the front door.
ekey net CP WM3: Lock, garage door and intrusion alarm system are controlled by three different relay outputs. Swiping your first finger will unlock your front door (relay 1). Swiping your second finger will open the garage door (relay 2) and swiping the third one will arm/disarm the alarm system (relay 3).